When a label says “carbon neutral”, you may ask: what does carbon neutral mean? Emissions are balanced by equal reductions or removals over a set period, netting to zero. It does not mean zero emissions.
Carbon neutral is one idea inside the wider topic of what is sustainability, so start there if you want the bigger picture.
| Item | Value |
|---|---|
| ISO 14068-1 released | November 2023 |
| PAS 2060 introduced | 2010 |
| PAS 2060 withdrawn by BSI | End of November 2025 |
| Net zero, as described via the SBTi | Reducing 90-95% of all emissions |
| EU EmpCo rules applied from | 27 September 2026 |
| Worked example: emissions offset after reductions | 850 tonnes of carbon dioxide equivalent |
These figures come from ClimatePartner’s glossary and Circular Ecology’s guide. Standards and laws change, so check the sources before you rely on them.
What carbon neutral means in plain terms
Carbon neutral is an accounting outcome, not a physical property. IEEE’s Technology Navigator describes it as a condition in which the greenhouse gas emissions of an organization, product, service, event, or activity are balanced over a defined period by an equivalent quantity of reductions or removals, giving a net figure of zero.
That is why a carbon neutral factory still emits. The claim asserts that an equal quantity has been removed or avoided elsewhere, and ClimatePartner makes the same point: the emissions are balanced through a verifiable process, not eliminated.
The accounting covers more than carbon dioxide. Other gases are converted into carbon dioxide equivalent using their global warming potential, and a refresher on what are greenhouse gases explains which ones count.

How a carbon neutral claim is built
A credible claim follows an order: measure, reduce first, then deal with what is left. Circular Ecology calls this best practice, because offsetting is typically how neutrality is reached but should not come before cutting emissions.
- Define the scope. The subject, calculation method and time period must be clearly stated.
- Measure the footprint. Use a recognised method, most often the GHG Protocol for organisations or a life cycle assessment for products.
- Reduce emissions. Start with efficiency, low carbon energy and design changes.
- Compensate what remains. Use independently verified, clearly additional credits.
- Disclose. Publish the plan and the offsets used, including their type and vintage.
Circular Ecology gives a simple example. A company that emits 1,000 tonnes of carbon dioxide equivalent finds reductions of 150 tonnes, then buys credits to offset the remaining 850 tonnes.
Measurement is the hard part. IEEE notes that value chain emissions dominate most footprints and are the hardest to measure, so a claim’s credibility usually rests on how thoroughly those categories were included, not on the credits bought afterwards.
Standards behind the claim: PAS 2060 and ISO 14068-1
The first internationally recognised carbon neutrality standard was PAS 2060, introduced in 2010 by the British Standards Institution (BSI). ClimatePartner describes a four-step process: calculate emissions, develop a reduction plan, offset what remains, and publish a Qualifying Explanatory Statement.
Circular Ecology adds that PAS 2060 did not define the depth or pace of reductions required, which led to variation in how it was applied.
The ISO standard tightens this. IEEE says ISO 14068-1 requires:
- a carbon neutrality management plan;
- a stated commitment with interim milestones;
- reduction within the value chain ahead of offsetting;
- disclosure of the offsets used, including their type and vintage.
The Chancery Lane Project explains that ISO 14068-1 treats neutrality as a pathway of continual improvement, so the need for offsetting decreases over time. It also covers all greenhouse gases, not only carbon dioxide.
Carbon neutral vs net zero
The two terms are often used interchangeably, but they are not the same. Circular Ecology says carbon neutrality describes a balance for a specific activity, event or reporting period, while net zero describes a long-term transition.
| Aspect | Carbon neutral | Net zero |
|---|---|---|
| Time frame | A defined reporting period, often a single year | The long term, aligned with climate science |
| Role of reductions | Expected but not prescribed in depth | Central and must be science aligned |
| Remaining emissions | Offsetting used to address them | Neutralisation limited to truly residual emissions |
| Long-term pathway | Can be achieved without one | Requires a defined reduction pathway and governance |
ClimatePartner reports that, according to the Science Based Targets initiative, net zero means reducing 90-95% of all emissions, with only a small residual neutralised through removals or natural sinks. Carbon neutrality may be a milestone on that path, but it does not replace structural decarbonisation.
The gap matters because, as IEEE puts it, carbon neutrality permits a wider set of compensating instruments and can in principle be declared without much reduction at all. That difference in stringency is why claim standards have tightened.
Why are carbon neutral claims under scrutiny?
The main worry is offset quality. IEEE cites a study in Nature Communications which found that a majority of credits bought by large corporate buyers carried a high risk of not delivering the reductions claimed. Our separate guide asks do carbon offsets work and looks at that evidence in more depth.
Permanence is a second issue. Removal credits differ mainly in storage durability, ranging from decades for biological stores to millennia for mineral and geological ones.
Regulation is the third.
Outside the EU, IEEE says regional advertising regulators have separately restricted unqualified neutrality claims on consumer products. Rules differ by country, so check the ones that apply where you live.
How to judge a carbon neutral claim
You do not need to be a carbon accountant to ask good questions. A defensible claim, IEEE says, carries an audit trail: the inventory, the reduction plan, the credit serial numbers and independent verification.
- Is the scope, method and time period stated?
- Can you see reductions against a baseline, or only credits?
- Are the credits issued under a recognised programme such as the Verified Carbon Standard, Gold Standard or Climate Action Reserve?
- Does the wording avoid implying that no emissions are produced?
- Was the work independently verified?
Verification programmes apply defined methodologies, third party validation and ongoing monitoring, according to Circular Ecology. Even so, they vary in scope and approach, so they set a minimum standard rather than remove the need to look closely.
Frequently asked questions
Does carbon neutral mean zero emissions?
Show answer
No. The product, event or company still emits. The claim is that an equivalent quantity of emissions has been reduced, removed or compensated elsewhere, leaving a net figure of zero.
Is carbon neutral the same as net zero?
Show answer
No. Carbon neutral usually covers a defined period and may rely on offsetting, while net zero is a long-term goal centred on deep, science-aligned reductions with only a small residual neutralised.
Is PAS 2060 still used for carbon neutral claims?
Show answer
According to ClimatePartner’s 2026 glossary page, BSI withdrew PAS 2060 at the end of November 2025. ISO 14068-1 is its successor, as the glossary entry explains.
Can a company be carbon neutral without cutting emissions?
Show answer
In principle a claim can be declared without much reduction, as IEEE notes. Under ISO 14068-1, though, reductions must come ahead of offsetting, so a claim made to that standard cannot rest on credits alone.



